Payment & Shipping Terms:
|Materail:||Galvanized Steel Sheet||Contactor:||Fuji Brand|
|Copper Pipe Thick:||1 Mm||Compressor:||ZW Series ,With Crank Heating|
|Working Temperature:||-20--45 Degree||Insulation:||Foam Pack Pipe And Stick On The Machine Innner|
|Heating Capacity:||7KW||Cooling Capacity:||5KW|
Ambient -25c Winter 55c Heating Room Save Power Inverter Air Source Heat Pump
Starting Small, Thinking Big
--Better understanding of user needs
Air conditioning can give you a comfortable living environment, air source heat pump, can meet your daily hot water needs
But the comfortable living environment + the demand for domestic hot water means that users need to spend more on investment and electricity costs. And the air-conditioning and heat pump are independent, which means they need more space for building units and installing pipes.
As a manufacturer and service provider of air conditioners, Meeting has been looking for solutions to reduce the cost of cold and hot demand for users' lives, and to target our research and development results to the market, allowing users to meet the hot and cold needs of life with lower investment and electricity costs.
1. Complying with ISO standard. Quality Ensured.
2. Complete Inspection for each unit before out of factory, covering water system and electricity detection and testing, ensuring 100% right product before shipment.
3. Strict quality control during production. We have liquid soap detection, halogen detection, electrical detection and water-soaking detection during production to avoid gas leakage and electrical problems.
4. Full inspection on bigger parts such as compressors, condensers, evaporators, expansion valves, flow switches, controllers etc. Selection inspection for small parts such as sensors, pressure switches etc.
5. Well noise control by using mute cotton for casing plates and soft rubber feet for floating compressors, some of the models use compressor isolation shields.
6. Well insulated with insulated cotton for every pipe and parts, include compressor, dryer filter and each pipes.
7. We have passed TUV and SGS inspections. We have CE, Ro HS, IEC, CCC, CB certificates for most of our products. Some of our products have en14511 test, en14825 test.
A. Payment service
2. L/C (for container order only)
B. Technical service
1. We calculate the capacity and recommend the best models.
2. We supply you the professional refrigeration technical support and electronic technical support for your installation, debugging and operation.
3. We supply the spare parts and technical support in and after the warranty time.
4. We supply the training course to your workers at our factory if you need.
5. We can offer site training to your workers in your place which is negotiable.
C. After-sales service
1. Technical support for your installation, operation and maintenance.
2. Standard warranty time: One years’warranty for heat pumps
You can also pay for extended warranty or we can renegotiate the longer warranty period.
We have to test every machine in the here before leave the factory
Q1. Can I have a sample order for Heat pump or Water tank?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q2. What about the lead time?
A: Sample needs 3-10days, mass production time depend on the products' quantity.
Q3.Do you offer guarantee for the products?
A: Yes, 12 months since the heat pump depart from the port of loading (Refer to the Bill of Lading).
Certificate we have got :
1> ISO 9001, ISO 14000
2> Our company has been inspected and certificate by EMC
3> CE And EN14511, EN 14825-ERP for heat pump exported to Europe
4> Energy label for all heat pump models sold to over sea market
5> Testing laboratory calibrated by CNAS
1).We were established in 2001.
2).We are a professional heat pump manufacturer, Located around Baiyun Air port
3). We are trading on Meeting Brand ,Meeting heat pump Well-know brand we operate in Europe market
4). Our company has been inspected and certificated by TUV and SGS.
5). We are the one of the first manufacturers whose heat pumps are with top COP gaining grants from Chinese government.
6).We passed ISO 9001 quality management system and ISO14000 environment protection system
7). Our testing laboratory can test heat pump up to 60KW heating capacity and create testing air temperature condition during -25DegC~45DegC,according to EN14511 standard.
8). Our leading products: Air to water heat pump , inverter heat pump, High water temperature heat pumps,
Mono block house heating heat pumps, Split heat pump, super low noise heat pump
Heat pump dryer, Ground source heat pump, water to water heat pump, swimming pool heat pump
Meeting heat pump Main parts :
Copeland R410A /R417A/R407C compressor
Aluminum finned copper coil heat exchanger
High efficiency Stainless Steel plate heat exchanger (Swep/GEA is option )
Saginomiya electronic expansion valves for throttling and EVI ,optimize performance
Carel pressure transducers
Sanhua 4 way valve
Built-in differential pressure flow switch
Meeting self-developed controller with remote control, user-friendly interface ,easy to understand and
Good look and long lasting galvanized sheet or stainless steel cabinet
R410A refrigerant is pre-filled inside indoor unit.
Contact Person: Steven